Upcoming Modules

In Q2-Q3, CEL will be introducing several multiprotocol products for edge device and network infrastructure applications. Beyond the key features of each product, CEL will be optimizing each solution for best-in-class performance…range, coverage, power consumption, throughput, latency, Etc. Enablement will be supported with development kits, quick-start guides, integration guides, example code, documentation, and an eager team ready to assist your efforts.

CMP4020 - HOSTED or HOSTLESS Dual Band Wi-Fi 4 + BLE 5.0

CMP4020 Dual Band Wi-Fi + BLE Wireless Module
  • Dual Band Wi-Fi 4 + Bluetooth Low Energy 5.0 + BT Mesh
  • 7 uA Deep Sleep, 30 uA Sleep
  • AT Command Set, FreeRTOS
  • Wi-Fi Direct, Soft AP, AWS/GCP/Azure
  • Example Code: OTA, Provisioning, etc.
  • Trust Zone, WPA3
  • Dual Core - Cortex M33 + M23
  • 2/8/16 MB Flash, 4 MB PSRAM, 512 kB SRAM
  • 35 GPIO, UART, USB, SPI, I2S, I2C
  • On-board Antenna or Connector
  • Certified

CMP40x0 Drop in Compatibilty

Many OEMs have a need to offer both 2.4GHz and 2.4/5GHz end-products. CEL has developed a solution that gives you two designs in one. Whether you want to protect your development investment, improve TTM, offer higher throughput with 5GHz, or provide your customers with either option, CEL has you covered with one design. Both modules are mechanically identically, offering pin for pin compatibilty. Also, both modules are supported by the same software and development tools. Lastly, both modules are able to be used as both HOSTED or HOSTLESS modules.

Learn more about CMP4010 Wi-Fi 4 + BLE 5.0 Module

CMP53x - Zigbee/Thread/Matter/Bluetooth 5/NFC

CMP53x Zigbee/Thread/Matter/Bluetooth 5/NFC Wireless Module
  • Cortex M4
  • +10 / +20 dBm Output Power
  • 1.64 MB Flash, 152 kB SRAM
  • 22 GPIO, I2C / SPI / USART
  • PWM, ADC, RTC
  • Low-Power Modes
    • Rx ~2.6 mA
    • Tx ~23 / 135 mA (+10 / +20 dBm)
    • Deep Sleep 0.5, 13, 42 μA
    • Wake on IO
  • NFC Type 2 Tag
  • Certified (on-board antenna)
  • NXP MCUXpresso IDE

Learn more about CMP53x multi-protocol module

CBT250 - Bluetooth 5.0/NFC

CBT250 Bluetooth 5.0/NFC Wireless Module
  • Cortex M4
  • +10 / +20 dBm Output Power
  • 1.64 MB Flash, 152 kB SRAM
  • 22 GPIO, I2C / SPI / USART
  • PWM, ADC, RTC
  • Low Power
    • Rx ~3.2 mA
    • Tx ~17.1 / ~10.2 mA
    • Deep Sleep 13 μA
    • Wake on IO
  • NFC Type 2 Tag
  • Certified (on-board antenna)
  • NXP MCUXpresso IDE

See CBT250 Bluetooth 5 + NFC module specs

CMP9620 - HOSTED 2x2 MU-MIMO Wi-Fi 6 w/Concurrent BT

CMP9620 HOSTED 2x2 MU-MIMO Wi-Fi 6 + Bluetooth Wireless Module
  • Linux/Android
  • Pre-built drivers tested with i.MX8
  • 802.11ax
  • Bluetooth Low Energy 5.3 + BT Classic
  • PCIe Host Interface
  • M.2 E-Key Form Factor
  • 3 x Integrated MFH4 Connectors

Learn more about the CMP9620 Wi-Fi 6 + Bluetooth 5.3 module

NXP Gold Partner logo

Recently Released Products

CMP4010 - HOSTED or HOSTLESS Wi-Fi 4 + BLE 5.0

CMP4010 HOSTED or HOSTLESS Wi-Fi 4 + BT Wireless Module
  • Single Band Wi-Fi 4
  • Bluetooth Low Energy 5.0 + BT Mesh
  • HOSTED - AT Command Set
  • HOSTLESS - FreeRTOS
  • Dual Core - Cortex M33 + M23
  • 2/8 MB Flash, 4 MB PSRAM, 512 kB SRAM
  • 35 GPIO, UART, USB, SPI, I2S, I2C
  • On-board Antenna or Connector
  • Certified

Request CMP4010 Info

CMP9010 - HOSTED Dual-Band Wi-Fi 4 + BLE 5.2

CMP9010 HOSTED Dual-Band Wi-Fi 4 + BT Wireless Module
  • Dual-Band Wi-Fi 4
  • Bluetooth Low Energy 5.2 + BT Classic
  • SDIO/UART Interface
  • Linux or RTOS
  • Pre-Built Drivers
  • Pre-tested w/NXP i.MX MPUs and RT MCUs
  • On-board Antenna or Connector
  • Certified

Request CMP9010 Info

Contact CEL