802.15.4 / ZigBee Solutions
Home > Products > 802.15.4 / ZigBee Solutions > Overview > 802.15.4 / ZigBee Transceivers
Applications |
Key Features |
RF Transceiver |
8051-Compatible Microcontroller |
Power |
Package Options
CEL’s ZIC2410 802.15.4 / ZigBee transceiver offers the industry's best link budget at 106 dB. A true monolithic solution, the ZIC2410 incorporates the RF transceiver with baseband modem, a hardwired MAC, and an embedded 8051 microcontroller, offering an excellent low cost high performance solution for all 802.15.4 / ZigBee applications. With an industry best +8dBm output power, the ZIC2410 will support a wide a variety of applications without the need for external amplification. Combined with a highly sensitive -98 dBm receiver the ZIC2410 leads the industry with 106 dB link budget. In addition to excellent RF performance at ZigBee (250 kbps) data rates, the ZIC2410 adds high speed modes, Turbo (500 kbps) and Premium (1 Mbps), for networks looking for increased throughput. The device provides numerous general-purpose I/O pins, peripheral functions such as timers and UART and is one of the first devices to provide an embedded Voice CODEC. CEL provides its customers with the CEL ZigBee Stack as part of the software library. Also available are the hardware & software tools required to develop custom applications.
The combination of industry leading link budget, high speed RF, and integrate voice CODEC make the ZIC2410 a truly distinct single chip solution.
|
 |
| Applications |
- Home Automation and Security
- Automatic Meter Reading
- Factory Automation and Motor Control
- Medical Patient Monitoring
- Voice Applications
|
- Replacement for legacy wired UART
- Energy Management
- Remote Keyless Entry w/ Acknowledgement
- Toys
- PC peripherals
|
| Key Features |
- Industry Leading RF Link Budget @ 106 dB
- Embedded 8051 Compatible Microprocessor with 96KB / 8 KB Flash / RAM
- Scalable Data Rate: 250kbps for ZigBee, 500kbps and 1Mbps for custom applications.
- Voice Codec Support: µ-law/a-law/ADPCM
|
- 4 Level Power Management Scheme with Deep Sleep Mode (0.3µA)
- Single Voltage operation: 1.9 to 3.3V using an internal regulator (1.5V core)
- Software Tools and Libraries for the Development of Custom Applications
- Hardware MAC (FIFO, AES, CRC…)
|
| RF Transceiver |
- Single-chip 2.4GHz RF Transceiver
- RF TX Power: +8dBm @1.5V
- RF RX Sensitivity: –98dBm @1.5V
- Scalable Data Rate: 250Kbps for ZigBee, 500Kbps and 1Mbps for custom application
- On-chip VCO, LNA, and PA
|
- Low Operating Voltage of 1.5V
- Direct Sequence Spread Spectrum
- O-QPSK Modulation
- RSSI Measurement
- Compliant to IEEE802.15.4
- No External T/R Switch or Filter needed
|
| 8051-Compatible Microcontroller |
- 8051 Compatible (single cycle execution)
- 96KB Embedded Flash Memory
- 8KB Data Memory
- 128-byte CPU dedicated Memory
- 1KB Boot ROM
- Dual DPTR Support
- Multi-Bank Support for 96KB Program Memory (3Banks of 32KB)
- I2S/PCM Interface with two128-byte FIFOs
- µ-law/a-law/ADPCM Voice Codec
- Two High-Speed UARTs with Two 16-byte FIFOs (up to 1Mbps)
|
- 4 Timers/2 PWMs
- Watchdog Timer
- Sleep Timer
- Quadrature Signal Decoder
- 24 General Purpose I/Os 24 for VFBGA Pkg)
- Internal RC oscillator for Sleep Timer
- On-chip Power-on-Reset
- 4-channel 8-bit ADC
- SPI Master/Slave Interface
- ISP (In System Programming)
- Internal Temperature Sensor
|
| Power |
- Internal Regulator for Single Voltage Operation with large input voltage range (1.9~3.3V)
- 4-Level Power Management Scheme with Deep Sleep Mode (0.3µA)
|
- Separate On-chip Regulators for Analog and Digital Circuitry.
- Battery Monitoring Support
|
| Package Options |
- Lead-Free 48-pin QFN Package (shown above)
(7mm x 7mm x 0.9mm)
|
- Lead-Free 72-pin VFBGA Package
(5mm x 5mm x 0.9mm)
|
