802.15.4 / ZigBee Modules
Matrix Series ZMXM-400
Texas Instruments™-based Matrix modules are designed to support point-to-point, point-to-multipoint, and TI’s Z-Stack™ mesh networks. 10mW and 100mW output models are available. Easy-to-use Dynamic Power Configuration (DPC) software makes it simple to adjust the output of either module down to 1mW.
Features
- Texas Instruments™ CC2430 Transceiver IC
- NE3508M04-T2-A – Super low noise figure and high associated gain Amplifier (Matrix 10 mW only)
- UPG2214TK-E2-A – Low insertion / high isolation switch
- Dynamic Power Configuration
- Up to 4000 ft of range
- Low 50mA power consumption @ 10mW output
- 2.1 to 3.6V input
- 17 general purpose I/O ports
- Simple UART interface
- FCC, IC, and CE certified
| MCU | Network | Performance | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Part No. | Transceiver Chipset | Fmax | I/O | Network | Software / ZigbBee Stack | Tx Power Output | Rx Sensitivity | Range | Vcc | Rx Current | TX Current | Standby Current | Dimensions | ||||||||||||||
| ZMXM-400-1 | TI CC2430 8 bit, 8051 | 32 MHz | 17 | Point-to-Point, Point-to-Multipoint, Mesh | LSR STAR Protocol Z-Stack™ | +10 dBm | -92 dBm | 2000 ft | 2.1V - 3.6V | 27mA | 50mA | 5µA | 23 x 29mm | ||||||||||||||
